"Quality and Life" № 1(25) 2020



Main theme: 
Quality management and quality management


Release date: 
23.03.2020

Только зарегистрированный пользователь может получить доспуп к электронной версии журнала

QUALITY MANAGEMENT

p. 3-9

Network Sharing of Collective Responsibility as Part of the Implementation of the ESM Model

B.V. Boytsov, doctor of technical sciences, professor, scientific director of the department «Technological design and quality management» of the Moscow Aviation Institute (NRU); Moscow

G.S. Zhetessova, doctor of technical sciences, professor, Karaganda state technical university; Republic of Kazakhstan, Karaganda
e-mail: zhetesova@mail.ru

M.K. Ibatov, doctor of technical sciences, professor, Karaganda state technical university; Republic of Kazakhstan, Karaganda
 
The article discusses the mechanism of network distribution of collective responsibility on the basis of the formulated principles of the Education Science Manufacturing (ESM) quality model, provides examples of the implementation of elements of network interaction with production through surveys of employers through design and educational programs evaluation systems.

Keywords: collective responsibility, assessment system, criteria, ESM model.


 
p. 10-17

Interaction Process Model – ESM Quality Model Development Tool

B.V. Boytsov, doctor of technical sciences, professor, scientific director of the department «Technological design and quality management» of the Moscow Aviation Institute (NRU); Moscow

G.S. Zhetessova, doctor of technical sciences, professor, Karaganda state technical university; Republic of Kazakhstan, Karaganda
e-mail: zhetesova@mail.ru

M.K. Ibatov, doctor of technical sciences, professor, Karaganda state technical university; Republic of Kazakhstan, Karaganda
 
The article discusses the methodology and provides the results of a multivariate SWOT analysis for a scientific and manufacturing educational process based on a set of regulatory and strategic documents, statistical data of the Republic of Kazakhstan; The main conclusions and description of the generated matrices for the subjects of interaction within the hierarchical triangle «Education – Science – Manufacturing (ESM)» are given.

Keywords: strategy, quality, SWOT analysis, Education Science Manufacturing (ESM) model, collective responsibility.


 
p. 18-25

Technical Regulations are an Effective Tool  for Improving the Quality of Life  of the Population

E.A. Sysoeva, doctor of economic science, associate professor, head of the Department of Statistics, Econometrics and IT in management of Federal State Budgetary Educational Institution of Higher Education «National Research Ogarev Mordovia State University»; Republic of Mordovia, Saransk
e-mail: sysoewa@mail.ru

The article analyzes the development and implementation of technical regulations on the territory of the Eurasian economic Union. The suggestions concerning the necessity of periodic assessment of the scientific and technical level of the current technical regulations are proposed. It is shown that mandatory for application within the territory of the Eurasian economic Union technical regulations are treated as documents that have an effective impact on improving the quality of the population life, the comfort of its accommodation, is aimed at protecting life and health of citizens, environment, they serve as a tool to eliminate technical barriers to trade, the exclusion of presence in the consumer market of the Eurasian economic Union substandard, counterfeit, adulterated, energy inefficient and hazardous products, including imported.

Keywords: quality of the population life, technical regulations, standards, safe products, the conformity assessment, Eurasian economic Union, the consumer marke.


 
p. 26-34

Ensuring the Quality of Documentation of Management Activities in the Organization: State Standard of Russian Federation 7.0.97-2016

T.P. Mozhaeva, candidate of technical sciences, assistant professor, head of department «Normative documents of quality management of education» at the Bryansk state technical university, full member of academic secretary of the Bryansk Branch of the Interregional Public Organization «Academy of quality problems»; Bryansk
e-mail: goa-bgtu@mail.ru
 
A.Z. Simkin, candidate of technical sciences, assistant professor, vice-rector for additional training and international cooperation at the Bryansk state technical university, vice-president of the Bryansk Branch of the interregional public organization «Academy of quality problems»; Bryansk

E.I. Sorokina, candidate of economic sciences, assistant professor, Dean of the Faculty of Economics and Management at the Bryansk state technical university, full member of the Bryansk Branch of the Interregional public organization «Academy of quality problems»; Bryansk

A.S. Proskurin, leading engineer of education quality management at the higher school at the Bryansk state technical university; Bryansk
 
The methodological bases for documenting the organization’s management activities are considered on the basis of the State standard of Russian Federation 7.0.97-2016, put into effect on July 1, 2018 «The System of standards on information, librarianship and publishing. organizational and administrative documentation. Requirements for the paperwork». The analysis of major changes in the design of management documents based on the considered State standard of Russian Federation 7.0.97-2016.

Keywords: documentation of management activities, State standard of Russian Federation 7.0.97-2016, requirements for the design of the document, the details of the document, the layout of the details.

 



p. 35-41

Standardization as a Tool of Achieving Sustainable Development of Organizations  of Social Services

N.L. Solovieva, head of the department of education quality at the Baltic State Technical University «VOENMEH» named after D.F. Ustinova; St. Petersburg

I.V. Chudinovskikh, chief specialist of the Center for regional problems of quality economics of Institute of problems of regional economics of Russian academy of sciences; St. Petersburg
e-mail: igor-chu65@mail.ru

The article discusses the management of sustainable development of organizations using standardization as one of the tools of the quality economy. Particular attention is paid to the existing practice of Russian and international companies building strategic goals and objectives in accordance with the UN SDGs. The connection between standardization and sustainable development of the organization, in particular organizations of the social services sector, is shown.

Keywords: sustainable development, standardization, organization of social services.



p. 42-44

Standardization in the Russian Federation Needs Updating System Management and Competent Personnel

M.L. Rakhmanov, doctor of technical sciences, professor of department 104 «Technological design and quali­ty management» of the Moscow Aviation Institute (NRU), Chairman of the technical Committee TC-320, full member of the Academy of Quality Problems; Moscow
e-mail: domrml@yandex.ru

The article outlines some problems of the functioning and improvement of the Russian national standardization system. The author encourages interested parties to discuss them.

Keywords: standardization, standardization management system, personnel, competencies, legal regulation.

 



p. 45-53

Standardization of Equipment and Methods  of Medical Control in Manned Space Flights  and Issues of Telemedicine

L.B. Strogonova, Moscow Aviation Institute (NRU); Moscow
e-mail: buksan@list.ru

Yu.A. Vasin, Moscow Aviation Institute (NRU); Moscow

R.A. Gardunio, Moscow Aviation Institute (NRU); Moscow

A.N. Knyazev, Clinical and Diagnostic Center of the Federal State Budgetary Institution Federal Clinical Center of High Medical Technologies of the Federal Medical and Biological Agency of Russia; Moscow

Since April 1961, all manned space flights have been accompanied by medical control ensuring flight safety. Medical control in space flight has a technological and medical methodology that allows, at a distance from medical specialists, to make an adequate medical decision for the current situation. This work would be impossible if there were no measures taken to unify and standardize equipment and techniques. Telemedicine technologies developed on the basis of flight medical control. The origin of the word telemedicine comes from the expression «telemetric medical information», adopted in space technology. The issues of mutual development and mutual enrichment, standardization of methods and equipment of two areas of medicine, medical control in extreme situations and general telemedicine are considered in this article.

Keywords: telemedicine technologies, medical control, standardization, security.



p. 54-57

Teacher Training for Teaching Astronomy  in the System of Secondary Education

E.V. Kondakova, candidate of pedagogical sciences, associate professor, department of physics, radio engineering and electronics of Yelets State University named after I.A. Bunin; Lipetsk region, the city of Yelets
e-mail: evkondakova@gmail.com

The preparation of teachers for teaching an independent academic discipline «Astronomy» is currently very relevant. A single program of continuing education courses, professional retraining of astronomy teachers does not exist. Meanwhile, the program of such courses should not only take into account specific conditions in the region (the level of teachers’ training, the availability of equipment, resources, etc.), but also guarantee the formation of the necessary competencies for teaching astronomy in the context of the implementation of the GEF SOO. One of the options for the program is discussed in the article.

Keywords: astronomy teaching methodology, teacher training, retraining and continuing education programs for astronomy teachers.



p. 58-65

Qualimetric Assessment of Quality  of Project Activity at the Implementation  of State Programs

I.I. Khabibullin, graduate student of the Moscow Polytechnic University; Moscow
e-mail: ilnuriskhakovich@inbox.ru

I.E. Parphenyeva, candidate of technical sciences, associate professor of Moscow Polytechnic University; Moscow

O.F. Vyacheslavova, doctor of technical sciences, professor of Moscow Polytechnic University; Moscow

The article deals with the issues of qualimetric assessment of the quality of project activities in the implementation of government programs, including an assessment of the quality of the organization of project activities and an assessment of the quality of project results. Such an assessment is necessary to monitor the organization of project activities in federal executive bodies and executive bodies of the constituent entities of the Russian Federation, as well as to identify and disseminate the best practices of executive bodies in organizing project activities. The relevance of the study is due to the achievement of the national development goals of the Russian Federation and the quality of the implementation of national projects.

Keywords: quality, project activity, indicators, criteria and evaluation scales, decomposition of requirements, maturity index, weighting coefficients, expert evaluation method.


 
p. 66-75

Global Best Practice Supplier Maturity Ratings

V.V. Tokarev, Moscow Aviation Institute (NRU); Moscow
e-mail: valdistokareff@mail.ru
 
A.R. Deniskina, candidate of technical sciences, associate professor, Moscow Aviation Institute (NRU); Moscow
 
The paper considers issues of evaluating the maturity of suppliers based on the application of best international practices that contribute to the identification of possible risks at the early stages of contractual relations, their prevention and exclusion.

Keywords: supplier maturity, checklist, audit automation, quality management.


 

TECHNOLOGIES

p. 76-81

Probabilistic Modeling of Adhesive-Latent Interaction of Structural Elements of Composite Materials

A.A. Barzov, doctor of technical sciences, professor, leading researcher of the Center for hydrophysical research of Faculty of physics of Lomonosov Moscow State University; Moscow

V.M. Korneeva, doctor of technical sciences, associate professor, professor of the Department «Metrology and interchangeability» of Bauman Moscow State Technical University; Moscow
e-mail: v_korneeva@list.ru

S.S. Korneev, candidate of technical sciences, associate professor, associate professor of the Department «Rocket and space technologies engineering» of Bauman Moscow State Technical University; Moscow

A.V. Cherednichenko, candidate of technical sciences, associate professor of the Department «Applied Mathematics» of Bauman Moscow State Technical University; Moscow

A block diagram of the interaction of the main elements of polymer composite materials and a probabilistic model of their functioning are proposed. The double role of the adhesion factor of polymer composite materials is shown and the possibility of its optimization is established. The kinetics of fracture of polymer composite materials is analyzed taking into account the strength of adhesive bonds and prospects for further research are outlined.

Keywords: рolymer composite material, structural diagram, adhesion, probabilistic model, kinetics, destruction.


 

ORGANIZATION OF PRODUCTION

p. 82-86

Marketing Research of the Structure  of the Total Cost of Ownership  to Optimize the Choice of Machines

V.S. Antipenko, doctor of technical sciences, professor, Russian University of transport (MIIT); Moscow

Yu.N. Kharitonov, candidate of physical and mathematical sciences, associate professor of Russian University of transport (MIIT); Moscow
e-mail: haritonoy@mail.ru

N.S. Nikolaeva, junior researcher, Bauman Moscow State Technical University; Moscow
 
For the optimal choice of metal-cutting equipment for the production of parts of various industries, in particular metal-cutting machines, various studies, including marketing, are required. Improving the quality of manufactured products is achieved by creating and selecting size ranges (ranges) of metal-cutting equipment that fully satisfy current and future consumer demands. The total cost of ownership to optimize the selection of metal cutting equipment is an element of marketing research. Optimizing your total cost of ownership will help you make the right decision when purchasing equipment.

Keywords: quality, total cost of ownership, marketing, optimization, size range, metal-cutting equipment.


 

TRANSPORT. AVIATION

p. 87-91

Implementation of an environmental management system at aviation enterprises as a factor  in increasing the competitiveness  of their products

O.A. Afonina, candidate of economic sciences, associate professor, Moscow Aviation Institute (NRU); Moscow

E.E. Galkina, candidate of economic sciences, associate professor, Moscow Aviation Institute (NRU); Moscow
e-mail: mai503@yandex.ru

T.I. Guseva, master of the Moscow aviation Institute (NRU); Moscow

S.A. Nezvedova, master of the Moscow aviation Institute (NRU); Moscow

D.O. Rassadina, master of the Moscow aviation Institute (NRU); Moscow

The competitiveness of the enterprise in the international market is determined by many factors, including the environmental efficiency of its work. Environmental efficiency can be improved by introducing an environmental management system at the enterprise, the effectiveness of which is influenced by the organization of the process of its development, systematic coverage of problems, and thorough elaboration of the system. The environmental performance of the enterprise has a positive impact on economic performance.

Keywords: competitiveness, environmental management system, organizational structure, responsibility for the effectiveness of the environmental management system.

 



p. 92-96

Evaluation of the Mass (Weight) Characteristics of the Elements of an Airplane Glider According to the Criterion of «Loading Intensity»  at the Initial Stages of Design

V.F. Ponomarev, senior lecturer of the 109b Department of Moscow Aviation Institute; Rostov region, Taganrog

I.V. Skibina, senior lecturer of Department 109b of Moscow Aviation Institute; Rostov region, Taganrog
e-mail: kaf104@mai.ru

The process of designing airframe assemblies solves the problem of creating an optimal design in terms of quality that ensures the fulfillment of a wide range of highly conflicting requirements. Key requirements include:
•             provision of high quality of complex shape of the outer (aerodynamic) surface of the units, especially the wing and plumage.
•             providing strength from the effects of external and internal loads.
•             provision of a given resource and design life
•             ensuring the manufacturability of the production and operation of the structure, its maintainability, etc.
At the same time, the satisfaction of basic requirements should be ensured with a minimum weight (weight) of the unit design.

Keywords: design, quality, aerodynamic design, design stress, glider.